Wltoys XK K200 RC Helicopter Parts Wltoys XK K200 Upgrade Parts list Mods,Wltoys XK K200 Battery

The details for the Wltoys XK K200 RC Helicopter Remote Control Aircraft

product description

Model: K200
Product name: Four-way single-blade flybarless helicopter (with air pressure altitude setting/optical flow positioning)
Material: nylon + engineering materials
Product size: rotor diameter 33CM, fuselage length 30CM, height 10CM
Color box size: 33.5*24.8*9CM
Outer box size: 55.5*35*51.5CM
Packing Quantity: 12
Gross net weight: 8.28KG/9.48KG
Product weight (bare metal): 125 (with battery)
Packing weight: 690G sealed box
Use time: the flight time is about 17 minutes
Charging time: 90 minutes
Remote control: 2.4G remote control 6 AA (not included, can be switched between left and right hands)
Remote control distance: 80-100 meters
Motor: main motor*1 (carbon brush) 050 tail motor*1 (hollow cup) 1020
Battery: 7.4V 600mAh 25C *1

Packing List:

Color box packaging*1, aircraft*1, remote control*1, manual*1, USB charger*1, main propeller*2, tail wind blade*1, lithium battery*1, hex screwdriver*1, Phillips screwdriver* 1

Note:

* Please read the instructions carefully before use.
* Don't over-charge or over-discharge batteries. Don't put it beside the high-temperature condition. Don't throw it into the fire. Don't throw it into water.
* There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding.

Product Details Features:

This remote control aircraft has many outstanding functional performances. Such as air pressure altitude control system, optical flow positioning, hovering debugging, 2.4GHZ remote control, powerful motor, modular battery, USB charging, flybarless design, one-key takeoff and landing, low voltage alarm. Super 16 minutes battery life. Explain in detail below:

1. Flight control system. The flight control system adds two receiver conversion sockets, 5V is suitable for FUTABA (S-BUS) and other receivers with (S-Bus) ports. 3V for use with DSM receivers.
Precautions for frequency operation of external receiver:
a. The remote controller must be in four-axis mode or a fixed-wing mode with a conventional layout, and cannot have mixing parameters.
The b.5 channel defaults to the light switch switch. It is recommended to remove the main propeller and the motor plug before linking. Avoid channel reversal causing the aircraft to rotate or fail to fly. M

2. Optical flow positioning: Optical flow positioning mode switch, optical flow positioning is recommended to fly in an environment with strong light, clear furnace, or less wind. The best effect is to keep the flying height at about 1.5 meters. At the same time, pay attention to the fact that the ground should not have strong reflections, transparency, unclear lines, disorderly surrounding the furnace, or flying on the water surface during optical flow positioning, which will affect the positioning effect.

3. Hover debug mode. When the plane is flying off course. The aircraft can be adjusted to the best hovering state through the hovering debugging mode.

4. The main motor is protected by a 050 carbon brush motor and an external heat sink, which makes the motor life longer. The tail motor uses a 1020 coreless motor, and adopts a detachable plug-type design, which is convenient for customers to replace.

5. 16 minutes long battery life. This aircraft contains a modular lithium battery with a power of 7.4V 600mah. A battery life can be as high as 16 minutes. The battery adopts a modular design, and the battery can be replaced conveniently and quickly without dismantling the case.

6. One-button take-off and landing functions. This helicopter has one-button take-off and landing functions,Which makes the operation easier. And it is more suitable for novices.

7. Super long remote control distance. This helicopter adopts a 2.4GHZ high-frequency signal connection, and you can accurately control this helicopter in 80-100m distance.

Wltoys XK K200 FAQ

Question: Do the Wltoys XK K200 waterproofs?

Most of the equipment of this remote control Helicopter is waterproof, which can fly in less watery terrain. At that time, if the water is too deep, try to avoid using it. Avoid the battery plug, etc., from touching water and burning the remote control Helicopter.

Question: How long is it usable until the charge?

When this remote control Helicopter is driving at full capacity, it can last about 17 minutes. If you buy 2-3x battery it can take 34 to 51 minutes. So you can buy more spare batteries. If one battery is dead, you can replace another battery.

Question: Is there only one battery in the package or there is two?

The original remote control Helicopter comes with a lithium battery inside. It has been installed in the remote control Helicopter, you can directly connect and use it after receiving the goods.

Question: what spare batteries do people recommend for this Helicopter.

We recommend that this remote control Helicopter can use the official 7.4V 600mah battery can greatly improve the driving time, experience more lasting driving pleasure.

Wltoys XK K200 Reviews

This Helicopter is perfect for boys who like to play with Helicopters. First of all, it looks cool. The body of the Helicopter is very light. The controllability is so simple to the normal RC Helicopters that kids play with. The owner is also very good.

For newbies, it is very easy to operate at first. We recommend reading the manual carefully and choosing to fly in 3D mode. Wait until you get good at it and then use the fast pilot. Because the Helicopter is very fast, if you use 6G mode at the beginning, you may hit walls and obstacles at high speed, which may be easily damaged.

The plane flies long enough. It is recommended to buy 2 batteries, and half an hour at a time is almost enough. No matter how long it takes. It may be easy to burn out the main motor, and you need to rest and cool down for a while before playing. Handling performance is very simple.